Service graphs
Graph Information
This graph shows the value of all S.M.A.R.T attributes of drive sdb (KINGSTON SEDC500M3840G). smartctl_exit_status is the return value of smartctl. A non-zero return value indicates an error, a potential error, or a fault on the drive.
Field | Internal name | Type | Warn | Crit | Info |
---|---|---|---|---|---|
Raw_Read_Error_Rate | Raw_Read_Error_Rate | gauge | 000: | ||
Power_On_Hours | Power_On_Hours | gauge | 000: | ||
Power_Cycle_Count | Power_Cycle_Count | gauge | 000: | ||
Write_Protect_Mode | Write_Protect_Mode | gauge | 000: | ||
SATA_Phy_Error_Count | SATA_Phy_Error_Count | gauge | 000: | ||
Bad_Block_Rate | Bad_Block_Rate | gauge | 000: | ||
Bad_Blk_Ct_Erl/Lat | Bad_Blk_Ct_Erl_Lat | gauge | 010: | ||
Erase_Fail_Count | Erase_Fail_Count | gauge | 000: | ||
MaxAvgErase_Ct | MaxAvgErase_Ct | gauge | 000: | ||
Program_Fail_Count | Program_Fail_Count | gauge | 000: | ||
Reported_Uncorrect | Reported_Uncorrect | gauge | 000: | ||
Unsafe_Shutdown_Count | Unsafe_Shutdown_Count | gauge | 000: | ||
Power_Fail_Uncompl_Cnt | Power_Fail_Uncompl_Cnt | gauge | 000: | ||
Temperature_Celsius | Temperature_Celsius | gauge | 000: | ||
Power_Fail_Health | Power_Fail_Health | gauge | 000: | ||
Reallocated_Event_Count | Reallocated_Event_Count | gauge | 000: | ||
SATA_CRC_Error_Count | SATA_CRC_Error_Count | gauge | 000: | ||
Thermal_Throttling_Cnt | Thermal_Throttling_Cnt | gauge | 000: | ||
CRC_Error_Count | CRC_Error_Count | gauge | 000: | ||
SSD_Life_Left | SSD_Life_Left | gauge | 000: | ||
Read_Fail_Count | Read_Fail_Count | gauge | 000: | ||
Flash_Writes_GiB | Flash_Writes_GiB | gauge | 000: | ||
Lifetime_Writes_GiB | Lifetime_Writes_GiB | gauge | 000: | ||
Lifetime_Reads_GiB | Lifetime_Reads_GiB | gauge | 000: | ||
Average_Erase_Count | Average_Erase_Count | gauge | 000: | ||
Max_Erase_Count | Max_Erase_Count | gauge | 000: | ||
Total_Erase_Count | Total_Erase_Count | gauge | 000: | ||
smartctl_exit_status | smartctl_exit_status | gauge | 1 |